Manuals
HBM-4 Thermoplastic Handliner
The HBM-4 applicator is designed to install all types of hot applied thermoplastic road markings, including crosswalks, legends, messages, symbols, center lines, and edge lines.
The HBM-4 has been engineered to meet the ridged demands of the contracting industry, and with a small amount of care and maintenance it will provide years of service with minimal repairs.
The construction of this applicator is primarily lightweight aluminum, and is balanced with a fixed rear wheel (or optional swivel wheel) to enable the operator to maneuver the unit with minimal effort. This maneuverability enables the operator to make very sharp turns and ultimately provides a great deal of flexibility to install many different types of road markings.
HBT-4 Bituminous Applicator
The HBT-4 applicator is designed primarily to install hot bitumen material to place reflectors or fill cracks. By design it can be used either left or right handed. The unit by itself has the capability of melting enough bitumen to make it a productive tool.
The HBT-4 has been engineered to meet the ridged demands of the contracting industry, and with a small amount of care and maintenance it will provide years of service with minimal repairs.
The construction of this applicator is primary light weight aluminum it also incorporates a swivel rear wheel for superior maneuverability. This maneuverability enables the operator to make very sharp turns and ultimately provides a great deal of flexibility to install reflectors or fill cracks. A removable all-aluminum basket is provided to hold reflectors.
Manuals
HBM-4 Thermoplastic Handliner
The HBM-4 applicator is designed to install all types of hot applied thermoplastic road markings, including crosswalks, legends, messages, symbols, center lines, and edge lines.
The HBM-4 has been engineered to meet the ridged demands of the contracting industry, and with a small amount of care and maintenance it will provide years of service with minimal repairs.
The construction of this applicator is primarily lightweight aluminum, and is balanced with a fixed rear wheel (or optional swivel wheel) to enable the operator to maneuver the unit with minimal effort. This maneuverability enables the operator to make very sharp turns and ultimately provides a great deal of flexibility to install many different types of road markings.
HBT-4 Bituminous Applicator
The HBT-4 applicator is designed primarily to install hot bitumen material to place reflectors or fill cracks. By design it can be used either left or right handed. The unit by itself has the capability of melting enough bitumen to make it a productive tool.
The HBT-4 has been engineered to meet the ridged demands of the contracting industry, and with a small amount of care and maintenance it will provide years of service with minimal repairs.
The construction of this applicator is primary light weight aluminum it also incorporates a swivel rear wheel for superior maneuverability. This maneuverability enables the operator to make very sharp turns and ultimately provides a great deal of flexibility to install reflectors or fill cracks. A removable all-aluminum basket is provided to hold reflectors.